How To Set Up A Ptz Camera

Overview

This affiliate provides information about the Cisco Video Surveillance PTZ IP photographic camera features, instructions for accessing the user interface, and information about the user interface. It includes the following topics:

•PTZ IP Camera Features

•Accessing the PTZ IP Camera

•Understanding the PTZ IP Camera User Interface

PTZ IP Camera Features

The Cisco Video Surveillance PTZ IP cameras are primarily used for monitoring broad open up outdoor areas such as building entrances, airports, highways, and parking lots.

The dome cover protects the camera body against rain and dust. The broad temperature range allows the camera to operate under extreme weather conditions.

The following PTZ IP cameras are available:

•Cisco Video Surveillance SD Outdoor 2830 PTZ IP Photographic camera, NTSC

•Cisco Video Surveillance SD Outdoor 2835 PTZ IP Camera, PAL

•Cisco Video Surveillance Hard disk drive Outdoor 6930 PTZ IP Camera

The Cisco Video Surveillance PTZ IP cameras offer a feature-rich digital camera solution for a video surveillance organization.

The 2830 and 2835 standard-definition (SD) cameras feature:

•NTSC and PAL models

•D1, 4CIF, and CIF resolution at 30 frames per 2nd (fps)

•12 x optical zoom

•360 continuous rotation

•Support for PoE+ and High PoE

•Local storage

•IP66 rating

The 6930 high-definition (Hard disk) camera features:

•Full HD resolution (1920 x 1080) at 30 fps

•20 x optical zoom

•360 continuous rotation

•Back up for PoE+ and Loftier PoE

•Local storage

•IP66 rating

In improver, the PTZ IP cameras provide networking and security capabilities, including multicast support, hardware-based Advanced Encryption Standard (AES), and hardware-based Data Encryption Standard/Triple Information Encryption Standard (DES/3DES) encryption. The cameras can exist powered through an external power supply or by integrated Power over Ethernet (PoE).

The PTZ cameras include the following key features:

• H.264 and MJPEG compression—The PTZ IP camera can generate H.264 and MJPEG streams simultaneously.

• Progressive scan video—The PTZ IP photographic camera captures each frame at its unabridged resolution using progressive scan rather than interlaced video capture, which captures each field of video.

• Analog video output—The PTZ IP photographic camera supports analog video for all resolutions with 15 fps or lower with no secondary stream.

• Medianet—The PTZ IP camera supports the Auto Smartports feature of the Media Services Interface (MSI). MSI enables a photographic camera to participate as an endpoint in the Cisco medianet architecture when connected to a medianet enabled switch.

• Twenty-four hour period/night switch support—An IR-cut filter provides increased sensitivity in low-light conditions.

• Multi-protocol back up—These protocols are supported: DHCP, FTP, HTTP, HTTPS, NTP, RTP, RTSP, SMTP, SNMP v2 and v3, SSL/TLS, and TCP/IP.

• Web-based management—You lot perform ongoing assistants and direction of the PTZ IP camera through spider web-based configuration menus.

• Pan, tilt, and zoom—You can remotely ready the camera to monitor a certain area by using the pan, tilt, and zoom controls.

• Motion detection—The PTZ IP camera can detect motion in user-designated fields of view by analyzing changes in pixels and generate an alert if motion is detected.

• Flexible scheduling—You can configure the PTZ IP camera to respond to events that occur inside a designated schedule.

• Syslog support—The PTZ IP camera can transport log data to a Syslog server.

• IP address filter—You can designate IP addresses that can admission the PTZ IP camera and IP addresses that cannot access the PTZ IP photographic camera.

• User-definable HTTP/ HTTPS port number—Y'all can define the port that is used to connect to the camera through the Internet.

• DHCP support—The PTZ IP camera can automatically obtain its IP addresses in a network in which DHCP is enabled.

• Network Time Protocol (NTP) back up—The PTZ IP camera can calibrate its internal clock with a local or Internet time server.

• Back up for C and CS mountain lenses—The PTZ IP photographic camera supports a diversity of C and CS mount lenses.

• Power options—The PTZ IP camera can be powered with 24 volts AC, which is provided through an optional external power adapter, or through PoE (802.3af), which is provided through a supported switch.

• Photographic camera access control—Y'all can control access to PTZ IP photographic camera configuration windows and live video past configuring various user types and log in credentials.

Accessing the PTZ IP Camera

After you perform the initial configuration equally described in the Chapter 2 "Initial Setup of the PTZ IP Camera," follow the steps in this department each time that you desire to access the PTZ IP camera windows to brand configuration settings, view live video, or perform other activities.

You access these windows by connecting to the PTZ IP camera from whatever PC that is on the same network as the PTZ IP photographic camera and that meets these requirements:

•Operating system—Microsoft Windows seven (32-bit or 64-fleck)

•Browser—Net Explorer 8.0 (32-scrap only)

Y'all demand this information to access the PTZ IP photographic camera windows:

•IP address of the PTZ IP camera. By default, the PTZ IP camera attempts to obtain an IP address from a DHCP server in your network. If the PTZ IP camera cannot obtain an IP address through DHCP inside 90 seconds of powering upward or resetting, information technology uses the default IP address of 192.168.0.100.

•Port number, if other than the default value. Default port numbers for the PTZ IP camera are 443 for HTTPS and eighty for HTTP. The PTZ IP camera administrator can configure an HTTPS port and an HTTP port equally described in the "Initialization Window" section.

•Your user proper noun and password for the PTZ IP photographic camera. The PTZ IP camera administrator configures user names and passwords as described in the "User Window" section.

To access the PTZ IP camera windows, perform the post-obit these steps.

Before you Begin

The Microsoft .NET Framework version 2.0 or afterward must exist installed on the PC that yous employ to connect to the PTZ IP photographic camera. You can download the .NET Framework from the Microsoft website.

Procedure

Step ane Start Internet Explorer and enter the post-obit in the accost field:

protocol://ip_address:port_number

where:

• protocol is HTTPS for a secure connexion or HTTP for a not-secure connectedness. Yous can use HTTP simply if you configure the camera to take non-secure HTTP connections as described in Chapter 2 "Initial Setup of the PTZ IP Photographic camera."

• ip_address is the IP address of the PTZ IP camera. The default IP address is 192.168.0.100.

• port_number is the port number that is used for HTTPS or HTTP connections to the PTZ IP camera. You do not need to enter a port number if you are connecting through the default HTTPS port 443 or the default HTTP port eighty.

For example,

•Enter the following for a secure connectedness if the IP accost is 192.168.0.100 and the HTTPS port number is 443:

https://192.168.0.100

•Enter the following for a secure connexion if the IP accost is 203.70.212.52 and the HTTPS port number is 1024:

https://203.70.212.52:1024

•Enter the following for a non-secure connection if the IP address is 203.70.212.52 and the HTTP port number is eighty:

http://203.lxx.212.52

•Enter the post-obit for a non-secure connection if the IP address is 203.70.212.52 and the HTTP port number is 1024:

http://203.seventy.212.52:1024

Pace 2 Enter your PTZ IP camera user name and password in the Username and Password fields, and so click Login.

To log in as the PTZ IP camera ambassador, enter the user name admin (which is case sensitive) and the password that is configured for the ambassador. To log in as a user, enter the user name and password that are configured for the user.

The Home window for the PTZ IP camera appears.

Understanding the PTZ IP Camera User Interface

After you log in to the PTZ IP camera, you tin can access the PTZ IP camera windows and perform a variety of administrative and user procedures.

The links and activities that y'all can see and admission in the PTZ IP camera windows depend on your PTZ IP camera privilege level. Privilege levels are configured as described in the "User Window" section and include the following:

•Ambassador—Can access all PTZ IP photographic camera windows, features, and functions.

•Viewer—Can access the Photographic camera Video & Control window with limited controls, and can access the Refresh, Logout, Nigh, and Help links from that window.

PTZ IP Camera Window Links

The PTZ IP photographic camera user interface includes links that you use to admission various windows and perform other tasks. Table ane-1 describes each link and lists the PTZ IP photographic camera privilege level that you lot must take to admission the link.

Table 1-ane Links in the PTZ IP Camera Windows
Link	Description	Privilege Level
Refresh	Updates the information in the window that is currently displayed.	Administrator User
Dwelling house	Displays the Organization Information window. For more information, see Table i-2.	Administrator
View Video	Displays the Camera Video & Control window. You may be prompted to install ActiveX controls when trying to access this window for the commencement fourth dimension. ActiveX controls are required to view video from the PTZ IP camera. Follow the on-screen prompts to install ActiveX controls.	Ambassador User
Setup	Displays the Setup window and provides access to the configuration menus for the PTZ IP camera.	Ambassador
Logout	Logs you out from the PTZ IP photographic camera.	Administrator User
About	Displays a pop-up window with model, version, and copyright information for the PTZ IP camera.	Administrator User
Help	Displays reference information for the window that is currently displayed.	Ambassador User

PTZ IP Photographic camera Windows

The PTZ IP photographic camera user interface includes these principal windows:

•System Information window—Accessed by clicking the Abode link. Displays the data that is described in Table 1-ii.

•Camera Video & Command window—Accessed past clicking the View Video link. Displays live video from the camera and lets y'all control a diverseness of camera and display functions. For detailed information, run across Affiliate 3 "Live Video Viewing."

•Setup window—Accessed by clicking the Setup link. Provides access to the PTZ IP camera configuration windows. For detailed information, come across the following chapters:

–Chapter 4 "Feature Setup."

–Chapter five "Network Setup."

–Affiliate six "Administration."

–Chapter vii "Log Configuration."

Table 1-2 Home Window Information
Field	Description
General Information
ID	Identifier of the PTZ IP camera. To configure the ID, encounter the "Basic Window" department.
Name	Name of the PTZ IP camera. To configure the proper noun, encounter the "Basic Window" section.
Current Fourth dimension	Current date and time of the PTZ IP photographic camera. To set the date and fourth dimension, run into the "Fourth dimension Window" department.
S/N	Serial number of the PTZ IP camera.
Firmware	Version of the firmware that is installed on the PTZ IP photographic camera.
Part Number	Cisco manufacturing office number of the PTZ IP camera.
Top Assembly Revision	Cisco associates revision number.
Network Condition
MAC Address	MAC address of the PTZ IP camera.
Configuration Type	Method by which the PTZ IP camera obtains its IP address. To configure this method, see the "IP Addressing Window" section.
LAN IP	IP address of the LAN to which the PTZ IP camera is connected. To configure this IP address, see the "IP Addressing Window" department.
Subnet Mask	Subnet mask of the LAN to which the PTZ IP camera is connected. To configure the subnet mask, see the "IP Addressing Window" section.
Gateway Address	IP accost of the gateway through which the PTZ IP camera is continued. To configure this IP address, come across the "IP Addressing Window" section.
Main DNS	IP address of the primary DNS server, if configured for the PTZ IP camera. To configure a chief DNS server, meet the "IP Addressing Window" section.
Secondary DNS	IP address of the secondary DNS server, if configured for the PTZ IP camera. To configure a secondary DNS server, run into the "IP Addressing Window" section.
IO Port Status
Input Port	Current state of the input port(s) on the PTZ IP camera. To configure an input port, see the "IO Ports Window" department.
Output Port	Electric current state of the output port(s) on the PTZ IP camera. To configure an output port, see the "IO Ports Window" department.
Stream ane and Stream 2
User	PTZ IP camera user name of each user who is accessing the main video stream (Stream one) or the secondary video stream (Stream two) through a client PC or a 3rd-political party device. By default, users appear in society of start time. To display users in ascending order of any data in any corresponding column, click the column heading. Click a cavalcade heading again to reverse the display society.
IP Address	IP address of the client device.
Start Time	Fourth dimension and date that the client accessed the video stream for this session.
Elapsed Time	Length of time that the customer has been accessing the video stream.
Codec	Video codec (H.264 or MJPEG) existence used for the stream.

Source: https://www.cisco.com/c/en/us/td/docs/security/physical_security/video_surveillance/ip_camera/ptz/config_guide/config_guide_ptz/overview.html

Posted by: juddwrick1979.blogspot.com